Previous slide
Next slide
The FOX 12-30 Hydraulic Crawler Drill is an excellent option in rock drilling equipment that can be used in Quarries, Open Pit Mining and Drilling Service Providers. This equipment generates high productivity with low operating costs and with 100% Brazilian technology. Again, it could only be manufactured by Wolf.
ADVANTAGES:
- Locomotion / Stability
- Labor Reduction: 1 operator
- Comfort and Operational Safety
- Lowest Operating Cost of the Category
- Services / Maintenance made by the manufacturer
- Operational and Maintenance Simplicity
- Spare Parts in the National Market
CHARACTERISTICS:
Technical Data | |
|---|---|
Diesel Engine
| Unit Compressor
|
Manufacturer: Cummins
| Pressure: 105 PSI (7 – 9 bar) |
Model 6cc 6CTA 8.3lt – 234HP | Type Screw
|
Cooler Water
| Flow: 250 CFM / PCM |
Diesel Tank Capacity 300 lt
| |
Type: Carroussel
| Spear |
Type: Carroussel
| Length: 7 meters
|
Capacity: 6+1 rod
| Usable length: 4.5 meters
|
Rod Greaser Rods: 3.66 m (12′)
| |
Traction | Hydraulic Chain Advance
|
Maximum Speed: 3,8 Km/h
| Planetary Reducer System
|
Traction Force: 56.596 N
| |
ascent ramp: 36%
| |
Truck Oscillation: +/- 10º
| |
Cleaning System
| |
DUST COLLECTOR (Standard)
| CLEANING WITH WATER (Optional)
|
Primary collector: Cyclone type
| Water tank capacity: 150 liters (33 gal)
|
Secondary collector: 4 filters
| |
Suction capacity: 35m³/min (882 CFM)
| |
Note: The FOX series of equipment is equipped with a Dust Collector and/or Water Cleaning system to meet the requirements of the Regulatory Norms for Mining NRM, which deals with Decree-Law No. 227 of 02/28/1967. NRM 09 in detail – Items 9.1.3.1 and 9.1.3.2 | |
AVAILABLE ITEMS | |||
|---|---|---|---|
OPTIONAL | |||
Cab with A/C and certified ROPS and FOPS | Water Tank | ||
Depth Gauge | Emergency Button (installed beside mast) | ||
STANDAR | |||
Night Light (Additional 4 light) | Horn and Siren | ||
Dust Collector (Primary and Secondary) | Anti-Jamming | ||
Surface Drifter W 19:
Technical Infomation | |
|---|---|
Work Pressure
| 120-140 bar (2.030 PSI) |
Impact Power | 19 Kw (26 hp) |
Impact Frequency | 2.600 bpm |
Weight | 237 kg |
Rotation | 0 – 150 rpm |
Rotation Torque | 750 Nm (533 lbf/ft) |
Thread Type | T38 / T45 |
Drilling Diameter | 2.1/2″ – 4”” |
Magazine (rod qty) | Carousel 6 + 1 |
Rod Length | 3,66m (12”) |
Dimensions | |
|---|---|
Weight | 13.000 kg |
Width | 3.035 mm |
Length | 8.951 mm |
Height | 3.752 mm |
